manualshive.com logo in svg

ODB LCT6000, Руководство пользователя

Поделиться
Скачать
ODB LCT6000 Скачать руководство пользователя страница 13

13

ODB COMPANY

800-446-9823     

LCT6000

SAFETY PRECAUTIONS

Improper use of the ODB leaf collector CAN result in severe personal injury or 

death.  All personnel using this leaf vacuum must be trained and qualified with 

all the operations, maintenance, repair and safety procedures defined in this 

manual.

1.3 Training:

The warnings and procedures regarding safety in this manual are to be 

used as a guideline only.  It is impossible to cover all the events that 

could happen in the vacuuming process.   For this reason, it is vital that 

the owner accept the responsibility to implement a training program that 

will provide every operator or mechanic the basic skills and knowledge to 

make good judgement in all situations.

This training program must include the entire scope of hazards, precau-

tions and government regulations encountered in the vacuuming process.    

The program should stress the need for regularly scheduled preventive 

maintenance and detailed equipment safety checks.

It is strongly recommended that all training programs be documented to 

ensure all operators and mechanics receive initial training on not just the 

operation but the safety features of the leaf collector.   

 

  

Содержание LCT6000

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды