Basics
5
www.ocularrobotics.com
Ocular Robotics Pty Ltd
2.4
Initial Setup
NOTE
– The robot eye head must be handled with extra care
during transport and installation. External loads exerted on the
head may result in damage.
2.4.1
RobotEye VISION REV25 Unit
Follow the steps below to set the REV25 unit up for use on a computer with a Windows
or Linux operating system. The library version number and system IP address shipped
with your system should be noted on the supplied
Certificate
.
Figure 2.4 Wiring and connections for the REV25 Unit
1.
Connect Cable Harness (16 pin to 10/6 pin cable) between controller and amplifier
board.
