VoIP Wireless Router User’s Manual
26
2-3-6 Hot Line
General Settings
→
Hot Line
Enable:
Tick the check box to enable a line. If some lines are not used, disable them (Pause Function) to
avoid unnecessary waiting when an incoming call is diverting to the line.
Hot Line:
Check to direct the call automatically to a pre-configured destination without any action when the
FXS is off-hook. (i.e. as the user picks up the phone). When the FXS is under Hot Line mode, no other
phone numbers can be dialed.
Hot Line No.:
Enter the number for pre-defined destination.
Warm Line:
Enter the time for the call to start with a pause, so the user can dial another number. The call
will be automatically directed to the pre-configured destination within timeout period.
FXS Group:
When there is an incoming call and the gateway will automatically assign an unassigned call
according to the Hunting Priority. If Port 2 does not want to be set as an assigned line to receive any
inbound calls, the function can be disabled.
