VoIP Wireless Router User’s Manual
51
2-5-2 Digit Map
Digit Map supports multiple dial plans which help users to arrange least cost route. Each Proxy Server has
individual dial plan which combines the original feature of Digit Map and Speed Dial. You can use “?” or “%”
in the column of Scan Code and VoIP Dial-out. “?” represents a single digit, and “%” represents a wildcard.
The function of the signs is to mapping the numbers between the number received from user and the
replaced or modified number for actual dial out. With this function, users can easily add certain leading
digits to replace a full set of numbers. There are 50 sets of leading digit entries to choose voice routing
interface.
Advanced Settings
→
Digit Map
Alert if Auto fails:
Check the box to play a voice announcement before calling out. It reminds the user that
this call is through PSTN.
Enable Pound Key ' # ' Function:
Check the box to treat ‘ # ‘ as a digit and send out with other numbers
when dialing. If you un-check the box and ‘ # ‘ is pressed after dialing, it will speed up the phone number
detection of the VoIP Router.
Default Call Route:
Defines the default call route of the VoIP Router.
VoIP:
The call route is VoIP only.
Deny:
The call will be denied.
Default VoIP Route Profile:
Enter the Profile ID (ranging from 1-10) for the Default VoIP routing.
Advanced Settings
→
Digit Map
Test Dial No.:
You have to set some rules in Digit Map Setting first and enter the number for test.
Result:
The gateway will show the number for VoIP Dial-out and PSTN Dial-out according to the Digit Map
Setting as below
