VoIP Wireless Router User’s Manual
76
Save Settings
When all setting procedures are completed, dial 509 (Save Settings) from phone keypad. Wait for about
three seconds, you should hear a voice prompt “1 (one).” You can now hang up the phone and please
reboot the VoIP Router to enable the new settings.
To inquire about the current VoIP Router WAN Port IP address setting
After completing all your settings, dial 101 from the keypad, then you can hear the system play back the
current WAN Port IP address. If the system does not play back the IP address after dialing 101, this
indicates that the VoIP Router currently is not connected to the Internet. Please check and make sure the
cable connections, account numbers, and passwords are correct.
3-1-1 IVR Functions Table:
Function
Code
Description
Example / Notes
111/101
WAN Port IP address Set/Query
Dial function code
114
and then dial
1 for a Static IP connection then
setup the IP address.
112/102
WAN Port Subnet Mask Set/Query
113/103
WAN Port Default Gateway Set/Query
114/104
Current Network IP Access Set/Query (1: Static IP, 2: DHCP, 3: PPPoE)
116/106
Phone Book manager IP address Set/Query
118
Restart
311/301
LAN Port IP Set/Query
312/302
LAN Port Subnet Mask Set/Query
109
Restore factory default IP address configuration
409
Restore factory default settings
509
Save settings