48
OSD3358-SM-RED
– User Guide
Rev. 1.0 9/19/2017
Octavo Systems LLC
Copyright 2017
Figure 46: OSD3358-SM-RED clock circuit
Figure 46 shows the circuit for OSC0 and OSC1 clock inputs of OSD335x-SM in the OSD3358-
SM-RED Board. More information on the inputs and circuit design can be found in AM335x TRM
(
http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf
), AM335x datasheet
http://www.ti.com/lit/ds/sprs717j/sprs717j.pdf
) and Reference Design Clock circuitry article
https://octavosystems.com/app_notes/osd335x-design-tutorial/bare-minimum-boot/clock-
NOTE:
The version of the PMIC used within the OSD335x-SM is not capable of supporting
RTC-only low power mode. However, the internal RTC LDO is still used to power the RTC
module by pulling RTC_KALDO_ENN (M16) to GND through a 10K resistor.
