Octavo OSD3358-SM-RED, Руководство пользователя

Страница: 30 / 77

30
OSD3358-SM-RED
– User Guide
Rev. 1.0 9/19/2017
Octavo Systems LLC
Copyright 2017
3.7 JTAG (J4)
A 20 pin CTI JTAG footprint J4 (shown below) is exposed for mounting a JTAG header on the
board. This port can be used for software development and debug by connecting to the board
through a JTAG emulator.
Figure 27: JTAG header footprint
In order to use the JTAG footprint it is recommended to use the emulators and JTAG header
parts listed below (The JTAG footprint comes with solder on the pads to make it easy to solder
the JTAG connector):
JTAG HEADER:
1.
Samtec Part No: FTR-110-03-G-D-06
Emulators:
1. Blackhawk XDS2xx USB debug probe ( http://www.blackhawk-
dsp.com/products/USB200.aspx )
2. Blackhawk XDS100v2 USB debug probe ( http://www.blackhawk-
dsp.com/products/usb100.aspx )
Software:
1. TI Code Composer Studio ( http://www.ti.com/tool/ccstudio )
2. IAR Embedded Workbench ( https://www.iar.com/iar-embedded-workbench/ )