MODULE OVERVIEW – LINE INPUT MODULES
27
4.3.2.
Top view, IN 9 input module
Legend
(1)
Rear panel
(2)
Ground Lift
Slide switch position toward rear panel:
Ground connected
Slide switch position toward pin header:
Ground disconnected
The ground lift allows you to isolate the ground con-
nection of the balanced input and signal ground of
the main unit.
If the CD player or DAC has only a two-pin mains
plug (without ground connection), you should use the
connected position.
(3)
Pin header for the pin
connector in the main
unit
The input modules have one pin fewer than the out-
put modules and can therefore only be mounted in
input slots.
(4)
Ribbon cable connec-
tor
For assembly with the main board (for assembly,
see 22).
4.3.3.
IN 9 technical data
4.2.4See section 4.2.4, page 26.
