MODULE OVERVIEW – OUTPUT MODULES
33
5.2.4.
Regulated output of the OUT 2 module (variable)
The regulated output is controlled by a separate line stage on the OUT 2 module. The
variable output is intended for direct control of unbalanced power amplifiers and active
loudspeakers. The output level can be adapted to the sensitivity of the power ampli-
fier/loudspeaker combination in two levels using the gain switch.
5.2.5.
Unregulated output (fixed)
The unregulated output supplies an output signal at line level 0.7 V at approximately the
same magnitude as a modern CD player.
This output is intended for connection to line-level inputs on a preamplifier/integrated
amplifier.
Note
If two devices are connected to each the unregulated and regulated out-
puts, the device connected to the unregulated output may cause interfer-
ence with the signal of the regulated output. For example, by switching
off the device using the power switch. If this occurs, the device must be
separated from the unregulated output.
5.2.6.
OUT 2 diagrams
Frequency response
The frequency response of the OUT 2 amplifier has a very wide range and is linear.