Octave HP 300 MK2, Руководство пользователя

Страница: 11 / 25

13
5. CONNECTIONS: Rear panel
TU AUX CD TAPE OUTPUTS
REC PLAY
L
R
R L GND
CD
SYM
PH
HP 300 MK2
Balanced Tube Preamp
Professional Series
OUT 1 OUT 2
AC 230 V
50/60 Hz
40 W
ٛ
MULTI
CHANNEL

CD SYM
XLR-input for balanced sources like CD-player etc.

PH-input
Model HP 300 MK2 line: This is a normal line-input for high level-units
Model HP 300 MK2 phono: This is the phono MC-input (see "Setting the MC-input")

GND (Ground)-connector
Suggested connection to the corresponding ground wire from your turntable. (See
”Connection reference phono MC”)

Tuner
Single ended input

AUX
Line input for Video, TV or alternatively, as a second function, the input for the front
channels of the multi channel system.

CD
Single ended input

Tape rec. Recording output for tape, cassette- or dat-recorders
Tape play Connect these Inputs to the play-Outputs of your recorder.

Outputs
Two single ended and one balanced output. In the Bypass/ Aux mode the signal is
switched to the OUT 2 and the balanced output. The single ended OUT 1 is furthermore
connected to the volume regulated line stage of the HP 300 MK2 amplifying the AUX
signal. This output can be used for additional earphone amps or similar.

Model identification plate
Model and serial number.

AC-mains receptacle
IEC-Standard AC-mains receptacle
Comment:
In the connection area, the lower socket line (red) is for the right channel, the upper
socket line (white) is for the left channel. Pin configuration XLR-sockets: : 1 = ground, 2
= plus, 3 = minus