S100
RIAA
Phono Module
Owner’s Manual
GB
Installation and set-up instructions
The NAD S100 RIAA Phono Module is a custom designed optional phono stage for the
NAD S100 pre-amplifier.
The module offers serveral settings for Moving Magnet (MM) and Moving Coil (MC) to
accommodate a wide range of cartridges. The module is factory-set at MC; 35dB gain;
47kohm. This setting will suit most high output Moving Coil (MC) cartridges.
NOTE:
Installation and set-up of the NAD S100 RIAA Phono Module must be left to your official
NAD dealer or qualified technicians. Do not attempt to install and/or change the settings
of the module yourself.
IMPORTANT NOTICE:
NAD can not accept any responsibility or held liable for the consequences of incorrect
installation of the S100 RIAA phono module. Incorrect installation may void warranty on
both the S100 RIAA phono module and the S100 pre-amplifier.
