Octave HP 300 MK2, Руководство пользователя

Страница: 6 / 25

8
2. SAFETY INSTRUCTIONS
2.1. Before you begin
Before using your HP 300 MK2, please check your local line voltage and pay attention to this
manual
In case of emergency: disconnect the plug from the mains supply
Never use an amplifier that is damaged or faulty. Make sure that it cannot be used until it has been
repaired by a qualified service engineer.
Make sure that there is easy access to the IEC socket and power cord.
Do not open the case
There are dangerously high voltages and hot tubes inside this equipment. To avoid a burn or the
risk of electric shock, never allow anyone except qualified personnel to open the case or remove
the grille.
Servicing and maintenance
For reasons of safety, please ensure that servicing, repairs and other modifications to OCTAVE
equipment are carried out only by a qualified technician. Fuses should also only be changed by a
qualified technician. Always replace fuses with ones of the same type and rating. If your amplifier
requires servicing, please ship or take your equipment directly to OCTAVE or to one of our
authorized service centres.
Explanation of the warning symbols :
The exclamation point within an equilateral triangle is intended to alert the user to
important operating and maintenance instructions.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated dangerous voltages' within the product's
enclosure that may be sufficient to constitute a risk of electric shock to persons.
Before connecting
Make sure that the voltage of your amplifier matches your electricity supply voltage.
Grounding
This amplifier is a protection class 2 device (without an earth conductor).