Octagon PC-600, Справочное руководство

Страница: 64 / 153

Chapter 7: Console devices
Description
The PC–600 has three options for console devices. You can use a monitor
and a keyboard as your console. You can use COM1 as the console, or you
can run the system without a console device.
Selecting console devices
The following represent the options on the PC–600 for console devices:
A standard VGA/SVGA monitor and a keyboard.
Serial console from COM1. A serial cable/null modem adapter plugged
into a host PC running HyperTerminal (or equivalent) provides both
input and output. The local keyboard also allows input but is not
required.
No console device means no video output, either from a monitor or the
serial console. A local keyboard allows input but is not required.
Monitor and keyboard console
To use a monitor and keyboard as the console, you will need the following
equipment (or equivalent):
PC–600 CPU card
PS/2 style keyboard
VGA/SVGA monitor
VGA–12 video cable, #4865
1. Refer to Figure 2–1 on page 23 for the location of various connectors and
jumpers before installing the PC–600.
2. Make sure that jumper the “V” video jumper, W12[5-6], is installed.
3. Connect the VGA–12 video cable into J18 and connect a VGA monitor to
the VGA–12 cable.
4. Connect a PS/2 style keyboard into J10.
64