Octagon PC-510, Руководство пользователя

Страница: 41 / 239

2-8
Quick start PC-510 user’s manual
Table 2-7 SSD0 device selection jumpers: W5, W2[7-8]
Pins Description
W5[1-3, 2-4, 5-7, 8-10] W2[7-8] SRAM with battery backup*
W5[1-2, 3-4, 5-6, 9-10] W2[7-8] Flash
W5[1-2, 3-4, 5-6, 9-10] EPROM**
* = default, pins jumpered
** = W2[7-8] is not jumpered
Table 2-8 Jupiter module antenna voltage select: W6
Pins Description
[1–2 ] 12V*
[1–3] 5V
* = default, pins jumpered
Table 2-9 Flat panel interface voltage select: W8
Pins Description
[1–2] 5V*
[3–4] 3.3V
* = default, pins jumpered
Table 2-10 Inverted shift clock signal voltage level select: W9
Pins Description
[1–2] 3.3V
[3–4] 5V*
* = default, pins jumpered
≡
PC-510 power supply requirements
The PC-510 is designed to operate from a 5VDC supply. An AT
compatible power supply connector header (P8, P9) is on board and
ensures the required number of power and ground paths from the power
supply. Make sure that you utilize all three +5 VDC conductors and all
four ground conductors.
The power connector at P8, P9 also pr/-12VDC and -5VDC
required for any PC/104 expansion board. P8, P9 also supplies the
correct voltage, +12 VDC, for flat panels that require back light opera-
tion. Refer to the P8, P9 power connector Table 2-1 for a complete
listing of pinouts and their description.