Chapter 2:
Installation
The 5445/5445E card requires one slot in a Micro PC card cage. Any
slot in the card cage will work. The card plugs directly into the
backplane.
≡
Hardware installation
WARNING!
The 5445/5445E card contains static-sensitive CMOS
components. The card is most susceptible to damage
when it is plugged into another card. The card becomes
charged by the user and the static discharges to the
system. To avoid damaging your card and its components:
Ground yourself before handling the card
Disconnect power before removing or inserting the
card.
WARNING!
Take care to correctly position the 5445/5445E card onto
the card slot that it is being installed into.
WARNING!
Octagon assumes no responsibility caused to flat panel
displays and/or Micro PC video cards if the display is
connected incorrectly.
Using a Micro PC card cage
To install the 5445/5445E card in a Micro PC card cage, you will need
the following equipment (or equivalent):
5445/5445E Video / Ethernet card
Micro PC card cage (5xxx Card Cage)
Power module (510x or 71xx Power Module)
Octagon CPU card with a Micro PC interface
10
