To install the 5445/5445E card:
1.
Refer to the component diagram for the location of various connectors
before installing the card.
Figure 2–2
Edge connector orientation
A31
B31
Card Edge Pins
A31 & B31
Card Edge Pins
A1 & B1
Micro PC
Passive
Backplane
A1
B1
Micro PC
2. Attach the Octagon power module to the card cage following the
instructions supplied with the power module.
3. Make sure power to the card cage is OFF.
4. Slide the 5445/5445E card into the card cage. The components on the
card should face away from the power supply. See Figure 2–3 for an
illustration of the card in a Micro PC card cage.
Figure 2–3
Populated Micro PC card cage
12
