Octagon 5266, Справочное руководство

Страница: 51 / 122

Chapter 5: Console devices
Description
The 5266 has three options for console devices. You can use a monitor and a
keyboard as your console. You can use COM1 as the console, or you can run the
system without a console device.
Selecting console devices
The following represent the options on the 5266 for console devices:
A standard VGA/SVGA monitor and a USB keyboard.
Serial console from COM1. A serial cable/null modem adapter plugged into a
host PC running HyperTerminal (or equivalent) provides both input and
output. The local keyboard also allows input but is not required.
No console device means no video output, either from a monitor or the serial
console. A local keyboard allows input but is not required.
Monitor and keyboard console
To use a monitor and keyboard as the console, you will need the following
equipment (or equivalent):
5266
2 mm VGA-12 video cable, #6392
USB style keyboard
VGA monitor
WARNING!
The video connector is keyed, but some connectors are not keyed
and can be plugged in incorrectly. Ensure that pin 1 of the cable is
connected to pin 1 of the connector (indicated by the dot). Incorrect
connection could damage your equipment.
To connect a monitor and keyboard:
1. Refer to Figure 2–1 on page 18 for the location of various connectors and
switches before installing the 5266.
2. Make sure that the “V” video switch, Switch 500 position 2, is set to On.
3. Connect the VGA-12 video cable into J6.
4. Connect a VGA monitor to the VGA-12 cable, and a USB style keyboard to J1.
5. If you want a mouse, connect a USB mouse to the other USB port.
51