Octagon 5266, Справочное руководство

Страница: 110 / 122

Jumper Settings
Table A–7 Digital I/O pulled high / pulled low jumper, W1
Jumper block W1
Pins jumpered Configuration of 19 I/O lines
[1:2] Pulled high
[2:3]* Pulled low
* default
Note If the digital I/O port is configured as an LPT printer port, these lines must be
pulled low.
Table A–8 ISA bus interrupt routing, W4 and W5
ISA bus interrupts
Pins jumpered Source Destination
W4[1:2] Bus IRQ3 IRQ3
W4[1:3] * Bus IRQ3 IRQ10
W4[5:6] Bus IRQ4 IRQ4
W4[5:7] * Bus IRQ4 IRQ11
W5[1:3] Bus IRQ5 IRQ7
W5[3:4] Bus IRQ5 IRQ5
W5[3:5] * Bus IRQ5 IRQ14
W5[4:6] Bus IRQ6 IRQ5
W5[5:6] Bus IRQ6 IRQ14
W5[6:8] * Bus IRQ6 IRQ6
W4[7:9] Bus IRQ6 IRQ11
W4[9:10] Bus IRQ6 IRQ12
W5[1:2] * Bus IRQ7 IRQ7
W5[1:3] Bus IRQ7 IRQ5
* default
Note Bus IRQ6 can be inadvertently routed to two interrupts. This is not an acceptable
configuration.
Table A–9 Onboard interrupt routing, W4
Onboard interrupts
Pins jumpered Source Destination
W4[2:4] * Serial B IRQ (COM2) IRQ3
W4[3:4] Serial B IRQ (COM2) IRQ10
W4[4:6] Serial B IRQ (COM2) IRQ4
W4[6:8] * Serial A IRQ (COM1) IRQ4
W4[7:8] Serial A IRQ (COM1) IRQ11
W4[8:10] Serial A IRQ (COM1) IRQ12
* default
110