Octagon 2060 PC/104 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 123

background image

Copyright

OS Embedder™ is a trademark, and Octagon Systems Corporation®, and the
Octagon logo are registered trademarks of Octagon Systems Corporation. ROM–
DOS™ is a trademark of Datalight. QNX® is a registered trademark of QNX
Software Systems Ltd. Windows XP® and Windows CE.net® are registered
trademarks of Microsoft Corporation. HyperTerminal ™ is a copyright of
Hilgraeve, Inc. CompactFlash™ is a trademark of San Disk Corporation.
Ethernet® is a registered trademark of Xerox Corporation.

Disclaimer

Copyright 2004, 2005, 2006, 2007—Octagon Systems Corporation. All rights
reserved. However, any part of this document may be reproduced, provided that
Octagon Systems Corporation is cited as the source. The contents of this manual
and the specifications herein may change without notice.

The information contained in this manual is believed to be correct. However,
Octagon assumes no responsibility for any of the circuits described herein, conveys
no license under any patent or other right, and makes no representations that the
circuits are free from patent infringement. Octagon makes no representation or
warranty that such applications will be suitable for the use specified without
further testing or modification.

Octagon Systems Corporation general policy does not recommend the use of its
products in life support applications where the failure or malfunction of a
component may directly threaten life or injury. It is a Condition of Sale that the
user of Octagon products in life support applications assumes all the risk of such
use and indemnifies Octagon against all damage.

Technical Support

Carefully recheck your system before calling Technical Support. Run as many tests
as possible; the more information you can provide, the easier it will be for Technical
Support staff to help you solve the problem. For additional technical assistance,
try the following:

Technical Support telephone: 303–426–4521
E-mail Technical Support: [email protected]
Applications Notes (via web):
http://www.octagonsystems.com/Solutions/appnotes.html
FAQ (via web): http://www.octagonsystems.com/pages/faqs.html

Revision History

Revision

Reason for Change

Date

A

Production Release

02 / 04

B

Updated thermal information

07 / 04

C

Clarified floppy drive

12 / 04

D

Clarified ATX power requirements

11 / 05

E

Removed reference to CD

08 / 06

F

Specified that CGA monitors are not
supported.

11/07

2

«
1
2
3
4
...
»

Содержание 2060 PC/104




























































































































Отзывы:

Нет отзывов

Похожие инструкции для 2060 PC/104

Бренд: CAME Страницы: 4

Бренд: 3xLogic Страницы: 2

Бренд: Javad Страницы: 35

Бренд: Delta Tau Страницы: 74

Бренд: Furuno Страницы: 24

USB-BRIDGEV2-EVAL

Бренд: IDT Страницы: 11

Бренд: Renesas Страницы: 941

Бренд: Glacier Страницы: 2

Бренд: ZALMAN Страницы: 16

Бренд: Digital Voice Systems Страницы: 32

Бренд: Alesis Страницы: 11

Бренд: NXP Semiconductors Страницы: 1202

Бренд: Intel Страницы: 20

Бренд: El.Mo Страницы: 16

Бренд: Velleman Страницы: 14

Бренд: mikroElektronika Страницы: 6

NetLink 2720 Series

Бренд: Patton electronics Страницы: 2

Бренд: Patton electronics Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды