Octagon 2060 PC/104 Скачать руководство пользователя страница 123 | Manualshive

Страница: 123 / 123

background image

3.

Tech Support will forward this information to the RMA Administrator who will
contact the customer to issue the RMA number.

4.

The customer must carefully package the product in an antistatic container.
Failure to package in antistatic packaging will VOID all warranties. Then
package in a safe container for shipping.

5.

Write the RMA number on the outside of the shipping container.

6.

The customer pays for shipping to Octagon. Octagon pays for shipping back to
the customer.

7.

Other conditions and limitations may apply to international shipments.

Note PRODUCTS

RETURNED

TO OCTAGON FREIGHT COLLECT OR WITHOUT AN

RMA NUMBER CANNOT BE ACCEPTED AND WILL BE RETURNED FREIGHT
COLLECT.

Returns

There will be a 15% restocking charge on returned product that is unopened and
unused, if Octagon accepts such a return. Returns will not be accepted 30 days
after purchase. Opened and/or used products, non–standard products, software
and printed materials are not returnable without prior written agreement.

Governing law

This agreement is made in, governed by and shall be construed in accordance with
the laws of the State of Colorado.

The information in this manual is provided for reference only. Octagon does not
assume any liability arising out of the application or use of the information or
products described in this manual. This manual may contain or reference
information and products protected by copyrights or patents. No license is
conveyed under the rights of Octagon or others.

123

«
...
121
122
123

Содержание 2060 PC/104




























































































































Отзывы:

Нет отзывов

Похожие инструкции для 2060 PC/104

Бренд: DAQ system Страницы: 41

Бренд: DAQ system Страницы: 19

Бренд: Cypress Semiconductor Страницы: 16

Бренд: Datasat Страницы: 24

SmartMesh IA-510 D2511

Бренд: Dust Networks Страницы: 30

Бренд: Renesas Страницы: 4

4 Channel Input Buffer Board SDAIBB

Бренд: B&B Electronics Страницы: 22

Бренд: QTech Страницы: 406

Open Standard Module RPX30 EVA-MI V1

Бренд: iesy Страницы: 9

Бренд: Omron Страницы: 432

Бренд: 2N Telekomunikace Страницы: 67

Бренд: AMD Страницы: 27

Бренд: EXAGATE Страницы: 7

Бренд: B&B Electronics Страницы: 24

-K6-2/450 - MHz Processor

Бренд: AMD Страницы: 98

Бренд: NUROTRON Страницы: 16

Бренд: ZALMAN Страницы: 32

VAR-SOM-MX6 HEAT PLATE KIT

Бренд: Variscite Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды