Oceanic versa, Руководство по эксплуатации, Страница: 37 / 50

37
VERSA
Soak and rinse the Versa in fresh water at the end of each
day of diving, and check to ensure that the areas around the
low pressure (depth) sensor (Fig. 40a) and button are free of
debris or obstructions. To dissolve salt crystals, use luke-
warm water or a slightly acidic white vinegar/water bath.
After removal from the bath, place the unit under gently run-
ning water and towel dry before storing. Transport your unit
cool, dry, and protected.
INSPECTIONS AND SERVICE
Your Versa should be inspected annually by an Autho-
rized Oceanic Dealer who will perform a factory prescribed
function check and inspection for damage or wear. To keep
the 2 year limited warranty in effect, this inspection must be
completed one year after purchase (+/- 30 days).
Oceanic recommends that you continue to have this inspec-
tion performed every year to ensure it is working properly.
The costs of annual inspections are not covered under the
terms of the 2 year limited warranty.
It is possible to damage the depth sensor of the Versa if it is
not pressure tested properly. Ensure that your Versa is never
pressure tested unless completely immersed in water.
Fig. 40 -Depth Sensor
a