Oceanic versa, Руководство по эксплуатации, Страница: 12 / 50

12
ACTIVATION
To Activate the Versa press and release the Button.
Backup Activation ( only if Water Activation is set ON)
As a backup, the Versa will also automatically activate by water contact. This is accom-
plished by bridging the gap between contacts located on the Button stem and back of the
case. The graphic H2O that will be displayed as an indication is described later.
• Upon activation, the unit will enter Diagnostic Mode (Fig. 6), displaying all segments
of the LCD (as 8's), followed by dashes (- -), then a countdown from 9 to 0. Diagnos-
tic Mode checks the display functions and battery voltage to ensure that everything is
within tolerance and functioning properly.
• After manual activation, it will also check the ambient barometric pressure, and cali-
brate its present depth as zero. At elevations of 2,000 feet (610 m) or higher, it will
recalibrate itself to measure depth in feet of fresh water
instead of feet of sea water.
WARNING: If the unit is activated at elevations higher
than 14,000 feet (4,267 meters), it will perform a diagnos-
tic check followed by immediate shutdown.
If no dive is made within 2 hours after initial activation,
the unit will automatically deactivate. If the wet contacts
are still bridged, the unit will reactivate and display the
H2O graphic.
Fig. 6 - Diagnostic Mode