Oceanic versa, Руководство по эксплуатации, Страница: 13 / 50

13
VERSA
SURFACE SEQUENCE
Immediately after completing its' Diagnostic check, the Versa
will automatically scroll through the following Sequence --
• Time of Day (displayed for 3 seconds), then -
• Surface Mode (displayed for 3 seconds), then -
• Time to Fly (displayed for 3 seconds only after a dive is
made, see page 31), then -
• Pre Dive Planning Sequence (each depth/time is dis-
played for 3 seconds), then -
• The Surface Sequence repeats for 2 hours, or until a dive
is made.
• Log and Set Modes can be accessed during the Surface
Sequence with the Control Button. This is described later.
Time of Day and Surface Mode (Fig. 7)
Displayed are -
• Dive Number ('0' if no dive made yet)
• Time of Day (for 3 seconds), then -
• Elapsed Surface Time (with flashing colon) and icon (for
3 seconds)
• Tissue Loading Bar Graph (only after a dive is made)
NOTE: If the wet contacts are bridged, the graphic
'H2O' will appear in place of the dive number '0' (Fig.
8). After the unit is rinsed and dried, '0' will replace
'H2O'.
Fig. 7 - Time of Day then
Surface Mode
Fig. 8 - Surface Mode
(rinse and dry the Versa)