Oceanic versa, Руководство по эксплуатации, Страница: 31 / 50

31
VERSA
Log Data will not be stored in the unit's memory until the 10
minute Transition Period on the surface is completed.
Once 10 minutes have elapsed, the Surface Mode icon and
Surface Interval time display colon stop flashing indicating
that the Dive and Transition Period are completed, and a
subsequent descent will be considered a new dive.
If you descend during the 10 minute Transition Period, time
underwater will be considered a continuation of that dive.
The time at the surface (if less than 10 minutes) will not be
added as Dive Time.
AFTER THE TRANSITION PERIOD (THE FIRST 2 HOURS)
For the remainder of the first 2 hours after surfacing ,
information will continue to be displayed as the Surface Se-
quence, scrolling through Time of Day/Surface Mode/Time
to Fly/Pre Dive Planning Sequence. You will have full access
to Log Mode and Set Mode.
Time to Fly
The Time to Fly Countdown Timer begins counting down 10
minutes after surfacing from a dive (after the Transition Pe-
riod) displaying the word 'FLY' and a countdown that begins
at 23:50 (Fig. 32) and counts down to 0:00 (hr:min).
Fig. 32 - Time to Fly