Oceanic OCEAMAG02, Инструкция по эксплуатации

Страница: 23 / 28

1. The three cycles used for the first time, the ice produced is small
and irregular.
2. When the ice collecting tray is full, please take out the ice
immediately, do not let the ice overflow the ice collecting tray.
CLEANING & USE GUIDANCE
1. Clean the inner liner, ice collecting tray, water box, ice shovel
and evaporator frequently. When cleaning, unplug the unit and
remove the ice cubes. Use a diluted solution of water and
vinegar to clean the inside and the outside surface of the ice
maker. Do not spray ice maker with chemicals or diluted agents
such as acids, gasoline or oil. Rinse thoroughly before starting.
2. Keep ventilation openings in the appliance enclosure, or in the
built-in structure, clear of obstruction. Do not use mechanical
devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
3. Reuse the machine after being idled for a period of time, it may
not have enough water to pump for air blockage. In this case,
the water shortage indicator light will light up. Just repress
button to restart the ice maker.
4. To ensure the cleanness of ice, please change water for water
reservoir at least once one day. If do not use for a long time,
please drain the water out and clean it up.
5. If the compressor takes a strike action for shortage water, fully
water or interruption of power supply, it will delay for 3 minutes
to start up after restarted.
6. Always use fresh water before starting ice production either at
initial installation or after a long shut-off period.
23