OCEANAIRE Polaris Series, Инструкция по инженерии, установке и обслуживанию

Страница: 19 / 24

2. FILTER
A clogged filter will cause the unit to operate at greatly reduced efficiencies. We recommend that the
filter be inspected on a regular bases every six weeks or more often depending on the environment. The
foam filter is located behind the return air grille and can be easily removed by pulling the grille out. The
filter must be washed periodically as needed by placing it in a dishwasher or soaking it in a solution of
warm water and detergent for 10 minutes. Then rinsing it clean with hot water and shaking excess
moisture from filter.
3.
CONDENSATE PUMP
When servicing pump follow these steps;
1. Make certain that the unit is disconnected from the power source before attempting to service or
remove any component.
2. Be sure the floats move freely. Clean as necessary.
3. Remove the volute and check for obstructions. Clean as needed.
4. Clean the tank with warm water and mild soap when mineral deposits are visible.
5. Check the inlet and outlet piping. Clean as necessary. Be sure there are no kinks in the lines that would
inhibit flow.
GENERAL
When necessary maintenance steps outlined above are followed, the air conditioner will provide long and
reliable service. The refrigeration and electrical circuits of the system should only be serviced by a fully
qualified service technician.
18
polarismanpg18