MNL-1002 Rev A
19
NIRQuest512-2.5 Sensitivity
When configuring a system for operation out to 2.5µ
m
it is important that you consider the following details:
•
Short Integration Times: For the detector to be sensitive out to 2.5µ
m
, the detector’s band gap energy must be small.
Unfortunately, this raises the absolute level of the detectors dark signal. Typical dark signals at 400ms (NIRQuest512-2.5) are
shown below.
•
Fiber Selection: For maximum signal intensity, alternative fiber materials should be used for wavelengths greater than 2.2µ
m
.
Содержание NIRQuest Series
Страница 2: ......