Connect the radio with your Wi-Fi Router
1. Insert the adaptor plug into the DC socket located at the rear side of the radio.
Plug the adaptor into a wall socket outlet.
Caution: Use only the adaptor supplied with the radio. Connecting a power supply with a
different rating will cause permanent damage to the radio and may be hazardous.
2. The radio will power on and display as follow. Choose <Yes> to start configuring network.
3. Select <Add/Remove AP> and <Add AP>:
4. It will start scanning the available Wi-Fi routers nearby. Choose to connect your AP and
enter the encryption code. Press ‘Enter’ to confirm.
Remark: The encryption codes are case sensitive to upper and lower case.
5. When the Wi-Fi connection is done, the display shows:
4
Connecting to Network
>>>>>>>
Configure Network?
<
Yes> No
Welcome
Add/Remove AP
AP:[ ]
Add AP
Remove AP
Association complete
When this symbol appears, the radio is
trying to connect to the Wi-Fi network
Skytune
Search
<
1/6 >
01:42AM
If you try to select Skytune when the Wi-Fi
network is not connected, it will show the
message below:
Skytune not connected,
retry later
After the Wi-Fi network is connected,
you will see the Wi-Fi signal bar here.
1. fm Bay Smooth Jazz
H2 ch
<
18/11225 00:25
iRadio
