10
INSTALLATION—STACKING KIT
SK-1
Two or three Cool Cube units are needed when:
REDUNDANCY IS NEEDED
COOLING LARGE AREAS
HIGH HEAT LOADS
and only a small amount of floor space is available.
The CAC can be stacked on top of each other to produce a capacity of 24,000 or 36,000
BTU/H, while maintaining the same foot print. To facilitate the stacking of the Cool Cube
units, a stacking kit
SK-1
, is required for each additional unit.
1. Disconnect Power before Servicing
2. Remove Handles from units, and remove the casters from the unit to be stacked.
3. Install rubber feet on base of unit to be stacked
4. Carefully stack the units—
each unit weights approximately 130 lb.
5. Secure the stacked unit to the one below it by using the stacking rails provided.
Install rails on both sides of units.
UNIT #2
STACKING RAIL
INSTALL ONE PER SIDE
UNIT #1
RUBBER FEET
(4 PLACES)
RUBBER FEET
(4 corners)
