6
CONDENSATE
The CAC has a 2-gallon polyethylene tank for collecting condensate. The tank is located
in the lower, front section of the unit. When the high water is reached, a cut-out switch will
AUTOMATICALL
Y cycle off the compressor/condenser fan. The evaporator fan will
continue to run and circulate the air.
CONDENSATE TANK
“FULL” SWITCH
SPRING
RUBBER
STOPPER
MAXIMUM
WATER
TANK HANDLE
HINGE
CONDENSATE
TANK TRAY
SUMP DRAIN HOLE
“CON” DISPLAYS
WHEN SWITCH IS
DEPRESSED
CONDENSATE
TANK
TANK
SPOUT
EMPTYING THE CONDENSATE RESERVOIR TANK
In the COOL Mode, condensate will collect in the condensate tank. When the tank is
full, the Deluxe Controller will shut down the compressor and the fault “
CON
” will be
displayed, along with the room temperature. To empty the tank, do the following:
1. Press the
POWER button, to turn the unit off.
2. Remove the tank from the lower front of the unit, using the handle.
3. Remove the rubber stopper, and empty the tank in a nearby sink.
4. Replace the rubber stopper.
5. Slide tank back into place, making sure it is reinstalled properly.
6. Press the
POWER button to re-start the unit.
REMOVE FULL
CONDENSATE TANK
“CON”
