Ocean Aire 2OACH1811, Инструкция по инженерии, установке и обслуживанию

Страница: 16 / 36

Plenum Kit
Duct/Flange
2OACH12 2OACH18 2OACH24 2OACH36 2OACH60 FILTERS
DEP - 10
10 inch
✓
(1) 10” X20 ” X1 ”
2DEP - 12
12 inch
✓ ✓
(1) 16” X24 ” X1 ”
DEP - 16
16 inch
✓ ✓
(1) 10” X30 ” X1 ”
(1)15” X30 ” X1 ”
Maximum
Equivalent
Feet
25 50 50 50 100
Est. External
Static
Pressure
(.20) (.25) (.25) (.25) (.50)
ACCESSORIES
EVAPORATOR RETURN AIR PLENUM
Evaporator return air plenums are available for installations where it is required to duct air to
the inlet of the evaporator. The evaporator return air plenum allows the user to connect
round duct (flexible or rigid) to the return air intake to reduce air noise and increase the
number of options for solving difficult application problems. The plenum attaches to the front
of the unit, replacing the return air grille. Refer to the table below for configuration and
application information.
DEP - 10
for 2OACH12 transitions the return air opening to a 10 - inch round duct.
2DEP - 12
for 2OACH18 & 2OACH24 transitions the return opening to a 12 - inch round
duct.
DEP - 16
for 2OACH36, 60 transitions the return opening to a 16 - inch round duct.
NOTE—When an evaporator return air plenum is installed, it is recommended to set
the evaporator blower speed to high, to avoid coil freeze - up .
FILTER(S)
EVAPORATOR
RETURN AIR PLENUM
14