17
OCEANAIRE DELUXE ELECTRONIC CONTROLLER
When power is connected, the controller will display
“888”
momentarily, and will then
disappear. Press the
POWER
button, then press the
TEMP SELECT
button until the
SET POINT
is displayed. Adjust the
SET POINT
to the desired temperature, and the unit
will heat/cool as programmed.
The systems controls temperature /
-
2°
POWER
-
Turns the unit on/off when power is supplied
MODE
-
Select the mode of operation from
AUTO...COOL
….
HEAT
….
MOISTURE CONTROL
.
AUTO
-
The controller will heat or cool as required.
HEAT or COOL
will display
accordingly. A 4° differential is needed to change between cooling and heating modes.
COOL
-
The system will operate in
cooling mode, only
.
HEAT
-
The system will operate in
heating mode, only.
MOISTURE CONTROL
-
The system operates in the cooling mode to reduce
humidity within the conditioned space. Every 4 hours, the fan is started, circulating the
air, and the air temperature is recorded by the controller. The cooling cycle is started for
one hour, or until the room temperature drops 2°, which ever comes first. This cycle re-
peats every four hours.
DELUXE ELECTRONIC CONTROLLER
The 2OACH controller is equipped with many features for a more precise level of comfort
and operation. Additionally, the controller can be removed from the unit and installed for
remote operation, if needed (accessory parts may be required).
POWER
button
Содержание 2OACH1811
