Oce VarioPrint 6000 MICR series, Руководство пользователя по эксплуатации

Страница: 191 / 264

Service information
Inspect the die sets
Introduction
Die sets have a life expectancy of approximately 500,000 punched sheets. The life expectan-
cy depends partially on the used media types. The life expectancy of the die sets can in-
crease, for example:
• When you observe the lubrication schedule (see ‘Lubricate the die sets’ on page 193 ).
• When you punch the same media type most of the time.
• When you punch less cover stocks.
You must periodically inspect the die sets for wear. The result of the inspection can be
one of the following.
• The die set is not worn. You can continue to use the die set.
• The die set shows signs of wear. You must replace the die set.
Note:
When a die set reaches the end of life, the die set can cause paper jams.
When to do
Inspect the die sets after 500,000 punched sheets and consequently each time you lubricate
the die sets.
Note:
See ‘Replace a die set’ on page 189 for information about how to remove and insert a die
set into the die set slot.
Illustration
[117] Inspect the die sets
Chapter 6 - Optional finishers and other devices 191
Inspect the die sets