Oce VarioPrint 2090, Руководство пользователя

Страница: 156 / 187

156 Océ VarioPrint 2090 User manual
Add the staples
Introduction
Task for operators, key operators
The finisher module has 2 on-line staplers and 1 off-line stapler. Each stapler
can staple a maximum of 80 sheets or a paper stack of up to 8.25 mm. The
number of 80 sheets was defined for Océ Red Label paper of 80 g/m
2
(20 lb
bond).
When a stapler run out of staples, the 'System monitor' on the operator panel
shows the
icon. The operator panel also indicates which stapler is empty,
for example 'Stapler 1 is almost empty'.
If the stapler runs empty when you start a job or during a job, a warning
message appears. When a job stops because of a lack of staples, you can do the
following.
■
Refill the staplers.
■
Cancel the job.
■
Continue the job without staples.
The system automatically detects the refill of the staplers. The warning
message disappears.
Note:
Only use staples of type S3.