Oce TCS500, Руководство по самообслуживанию

Страница: 13 / 26

Use the wizards to achieve optimal output quality
When to do
Before you start the 'Optimize print quality' wizard, first check the following.
■
Did you define the correct media type for your job? ‘Define the correct job settings for
optimal output quality’ on page 9
■
Did you define the correct print mode settings for your job? ‘’ on page 9
After you checked that you used the correct media and the correct print modes, use the
'Optimize print quality' wizard to solve the following problems on your printed output.
■
Regular horizontal light or dark bands on the output
■
White stripes in filled areas
■
The length and width measurements are different from the original
■
The colored lines are not well aligned or blurred
■
Missing sections in lines or stepped lines
■
Parts of characters are missing
■
Drop-out caused by nozzle problems.
Chapter 8 of the user manual includes complete information about how to optimize the
print quality.
Before you begin
During the 'Optimize print quality' wizard, the system does a calibration. The calibration
is only possible on one of the following media types indicated below. Before you start the
wizard, first load and define one of these media types on the printer.
■
Draft paper
■
Standard paper
■
Premium coated paper
■
Bond
■
Coated bond
■
Matt photo paper
■
High gloss photo paper
■
Deluxe bond
■
Recycled plain paper
■
Plain paper coated
How to start the Optimize print quality wizard
1.
Press the on-line / off-line key (key 4 on the folded cover) to set the printer off-line.
Chapter 1 - Self support tips (GB) 13
Use the wizards to achieve optimal output quality