Oce TCS500, Руководство по самообслуживанию

Страница: 11 / 26

Then When
■
The media type defined on the printer
must be the same as the media avail-
able on the printer. When the media
type defined on the printer is not the
same as the media available on the
printer, use the 'Change media type'
wizard to change the media type
■
Use coated media
■
Use the default drying time
■
Remove the printer from areas of high
humidity.
The color of one area or line runs into
the color of another area or line
■
Use the 'Presentation' quality mode
■
Use the 'Optimize print quality' wiz-
ard to correct the problem.
■
When failing printheads cause this
problem, use the 'Replace printhead'
wizard to replace the failing print-
heads.
Parts of lines are missing or lines are
stepped
■
Use the 'Presentation' quality mode
■
Use the 'Optimize print quality' wiz-
ard to correct the problem.
Parts of characters are missing
Coalescence occurs in the 'Check' mode
when you print on high gloss photo pa-
per. Use the 'Release' or 'Presentation'
quality mode On high gloss photo paper the individual
ink drops merge on the media
Chapter 1 - Self support tips (GB) 11
Define the correct job settings for optimal output quality