Oce Oce TDS800, Руководство пользователя

Страница: 47 / 281

Using the Océ TDS800 to Copy 47
The Correction key
The orange key marked with C is located at the bottom of
the central section of the operator panel. Press the Correction key one time to
reset the selected setting to its default value. Press the Correction key two times
to reset the numeric display to ‘1’. Press the Correction key three times to
return to the first screen on the display.
The Stop key
Press this red key to Stop the job. For more information see
‘Stop a job’ on page 63.
The job interrupt key
You use the Job interrupt key to set extra priority to your
copy job or to remove extra priority from your copy job. Determine the priority
of your copy job with the Job interrupt key before you scan your originals. The
job is placed on top of the printing queue in the queue manager.The interrupt
job will start running directly after the current printing page is completed. No
new job is send to the printer.
The Numeric keys
The keys with numbers on the lower part of the middle
operator panel are used to specify numbers. Values you can set with the
numeric keys include: the number of copies or sets up to a maximum of 999,
zoom factor, user id, and account id.
The ‘numeric display
Displays the number of sets or copies, set with the
numeric keys.
The Start key
Use the green Start key to start the feeding of the original, to
restart the scan process, or for other purpose such as to mark the end of a set.