Oce Oce TDS800, Руководство пользователя

Страница: 36 / 281

36 Océ TDS800 User Manual
Printer operator panel actions
On the Océ TDS800 printer operator panel you can perform a number of
actions:
■
Set the media type
■
Set the media type for manual feed
■
Set the media size
■
Set a special media indication
■
Stop a print job
■
Select the preferred languages
■
Clean the reinforcement knives
Media types and sizes on the printer
One of the features of the Océ TDS800 printer is the automatic media change
function. This function enables the printer to switch to another roll of the same
media when there is not enough media on the current roll to finish the print run.
Specify media type and the media size after you load media, as described in
‘Maintenance’ on page 205. The Océ TDS800 supports both DIN and ANSI
media formats.
See ‘List of available material types and sizes’ on page 253 for an overview of
all materials that can be used on the Océ TDS800 Printer. See‘Overview of
paper series’ on page 254 for formats included in the paper series.