Oce im2330, Руководство по печати

Страница: 216 / 386

5 Printing from Windows
214 Setting Up Print Options
- Center Top — Select this to create holes along the top edge and print.
- Middle Left — Select this to create holes along the left side and print.
y “None” can only be selected if a hole punch unit is not installed.
y “None” can only be selected when the Booklet printing is set at the Layout tab.
11) 2-Sided Printing
This sets 2-Sided printing (printing on both sides of paper) according to the type of binding
for 2-sided-printed pages.
This option is only for printing on both sides of the paper. If you want to bind the output with
staples, you should set the finishing option as well.
- None — Select this if you do not want to print on both sides of the paper.
- Book — Select this to print on both sides of the paper in the same direction and to bind
the document along the vertical side of the paper so that the pages can be turned over
right and left.
- Tablet — Select this to print on both sides of the paper with a vertical reversal and to bind
the document along the horizontal side of the paper so that the pages can be turned over
up and down.
y “Book” or “Tablet” will be automatically selected when the Booklet printing is set at the
Layout tab.
y “None” can only be selected when Tab printing is enabled.
y For im2830 Series, “None” can only be selected when no Automatic Duplexing Unit is
installed.
1
2
Portrait
1
2
Landscape
1
2
Portrait
1
2
Landscape