Oce CS9350, Руководство пользователя

Страница: 85 / 194

CS9350 User’s Guide
4-85
NOTE

If a large amount of data is saved on the printer, the operation panel may not return to
Normal by a single [Cancel] key operation.
In such cases, wait for a few seconds and press the [Cancel] key again.
4.3.3 Cutting media
If Media ejection mode is set to “Cut”, the printer cuts the media automatically after printing.
5.1.6 Output Mode menu
If you press the [Cutting] key on the operation panel more than two seconds while the operation panel is
Normal, you can cut the media at the desired position.
Step 1:
Confirm that the operation panel is Normal.
Step 2:
Press the [Cutting] key on the operation panel for more than two seconds.
• The printer feeds the roll media to the length of the margin and cuts the media.
NOTE

When loading the new roll media, cut the front edge of the media if it is not straight.

The cutter is a consumable component.
Replace it periodically.
6.1.3 Replacing Cutter

When the media detection is set to “Off”, the media cannot be cut automatically.
Printer status Operation with the [Cancel] key pressed for two seconds
During printing Terminates the printing, and deletes one data remaining in the printer.
Receiving data/analysing data Deletes the data already received and converted.