manualshive.com logo in svg

Oce CS9350, Руководство пользователя

Поделиться
Скачать
Oce CS9350 Скачать руководство пользователя страница 138

CS9350 OPERATION MANUAL

5-138

5.6.2 

Sleep Mode Start menu

Activate Sleep Mode

 

During Sleep Mode, “Restart –> Enter” will be displayed in the operation panel.

 

During Sleep Mode, pressing [Enter] key will return the printer to normal operation.

NOTE

If the printer is under one of the following conditions while shifting to the Sleep Mode, 
“Don’t Start Sleep Mode” is displayed, and will not shift to the Sleep Mode.

The front cover is open.

Maintenance cover is open.

The media loading lever is raised.

The waste fluid tank is full.

The ink cartridge is empty.

The ink cartridge has been removed.

An object other than an appropriate ink cartridge is inserted in the cartridge slot, etc.

Activate Sleep Mode again after returning the printer to a normal state.

 

7.2 Error messages

If the printer is under one of the conditions above during the Sleep mode, the printer will 
not return to the Normal condition even pressing the [Enter] key.

 

Return the printer to a normal state, and press the [Enter] key to return the printer to 
normal operation.

 

7.2 Error messages

Setup item

Setting

Description

Start

Start Sleep Mode?

•[Enter] key: activates Sleep Mode.
•[Cancel] key: shifts to the previous menu without activating 

Sleep Mode.

 

5.6 Sleep Mode menu

Restart –> Enter

The printer is in Sleep Mode.
•[Enter] key: return the printer to normal operation.

Содержание CS9350



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды