Oce CS9350 Скачать руководство пользователя страница 127

Страница: 127 / 194

CS9350 OPERATION MANUAL

5-127

Printing Mode Auto Cleaning

Set the auto cleaning interval for printing mode.

Pre-printing Mode Auto Cleaning

Set the value for auto-cleaning in pre-printing mode.

5.1.16 Ink

Status

menu

Displays the various information of smart chips.

SmartChip menu

NOTE



To display the various information of Smart chips, use genuine ink and S/C cards.

If ink other than genuine ink is used, the ink status will not be displayed correctly.

Setup item

Setting

Description

PrintingTime

<Off> to 5 mins to 180 mins Selects the time for auto-cleaning while printing.

•Off: Auto cleaning is not performed.
•Others: Perform the head cleaning selected in Cleaning menu

after the setting time has elapsed.

6.2.3 Head cleaning

—

•[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous

menu.

5.1.15 Auto Cleaning menu

Setup item

Setting

Description

Before Print

<Off>

The auto cleaning is not performed.

•Perform the head cleaning selected in the Cleaning menu

before printing.

6.2.3 Head cleaning

—

•[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous

menu.

5.1.15 Auto Cleaning menu

Setup item

Setting

Description

KCMY

0 to 100 (unit:%)

The amount of ink remaining in each ink cartridge of K/C/M/
Y is displayed.

—

•[Cancel] key: shifts to the previous menu.

5.1 Setup menu

Содержание CS9350



































































































































































































Результаты поиска

Содержание CS9350

Отзывы:

Бренды по названию

Популярные бренды

Oce CS9350, Руководство пользователя

Результаты поиска

Содержание CS9350

Отзывы:

Бренды по названию

Популярные бренды