Oce CS2024, Быстрый старт

Страница: 14 / 44

14 Chapter 1 Read this first
Assembling the Stand
3.
After you use the hex driver (provided) to loosen the hex screws of the stand stay (e),
remove the tape from the left and right end of the stay, hold the stay as shown, then
insert it into the grooves of stand leg L (a) and stand leg R (c).
[34]
4.
Secure the stand stay by tightening the left and right hex screws with the provided
hex wrench.
[35]
e
a
c