Oce CS 4040, Руководство по установке

Страница: 36 / 51

36 Océ CS 4040/4050 Installation Manual
Upgrading the scanner firmware
The Océ CS 4040/4050 exists in three different configurations. For details
about the different configurations, see ‘Scanner configurations’ on page 8.
You upgrade the firmware by replacing the “smart card” located in the scanner.
Contact your Océ sales representative to procure a “smart card” corresponding
to the configuration you want.
▼
To upgrade the scanner firmware
1
At the front of the scanner, locate a streamer with the Océ name. At the left
extremity you will find a small tab.
2
Pull on this tab towards the left. The “smart card” holder becomes visible.
3
Push on the holder as indicated to access the “smart card”. You may need to
pull the holder out slightly to remove the “smart card”.
4
Replace with a new card.
5
Push the holder back into place.
6
Slide back the streamer.