Oce CS 4040, Руководство по установке

Страница: 17 / 51

Scanner installation 17
Power supply connection
The Océ CS 4040/4050 use a grounded 3-prong power cord to connect to a
grounded power outlet with a maximum 16-ampere protection.
Your electrical installation must comply with IEC 364 standards and the
national standards of your country.
▼
To connect the scanner to the power supply
1
Locate the power connector at the back of your scanner.
2
Plug one end of the power cord delivered with the scanner into the connector.
3
Verify that the inlet voltage selector setting corresponds to the voltage of your
electrical outlet.
4
Plug the other end of the cord into the electrical outlet.
5
Turn the
ON/OFF
switch to
ON
.
The warm-up indicator on the scanner control panel lights up and remains lit
while the scanner performs various internal diagnostic tests. When fully
powered on, the Power-on indicator stays lit continuously.