Oce ColorWave 600, Руководство пользователя

Страница: 118 / 324

118 Chapter 4 Configure the printing system
Set the default print job settings
[38]
Overview of the default print job settings - Image
Editable for Key operator and Power user.
'Preferences' - 'Print job defaults' - 'Image'
Setting Description
'Media source' The 'Media source' setting can be used to select the
default output material and format. The 'System' screen
of the printer operator panel will show you what rolls are
currently loaded.
You can select a specific roll number that the Océ
ColorWave
™
600 must use by default.
If you select 'Automatic next larger' or 'Automatic exact
fit' the Océ ColorWave
™
600 will try to use a roll format
that matches the required output size of your print file.
'Print cut method'
[124]
■
Select 'Standard' to cut the print to a standard media
size (DIN, ANSI, ...)
■
Select 'Synchro' to cut the print at the end of the
image. The system cuts at the measured length of the
original times the scale factor.
■
Select 'Custom' (numeric) to cut the print on a
specified length. The print length is defined by value
of the setting 'Custom print length'.
'Custom print length' Print length if the 'Print cut method' is set to 'Custom'.
'Add leading strip'
[125]
When you enter a value, the Océ ColorWave
™
600 adds a
blank strip of the specified length at the beginning of the
output.
'Add trailing strip'
[126]
When you enter a value, the Océ ColorWave
™
600 adds a
blank strip of the specified length at the bottom of the
output.