Oce 7050, Техническое и сервисное руководство, Страница: 82 / 275

ed. 3 02 Charging 403
C
o
n
fi
d
en
ti
al
©
O
c
é
N
e
der
la
nd B.
V
. V
e
nlo
2
001
9 Wind the grid wire 15 times between the left and right housing from the outside
inwards. Position the grid wire in the toothed bridges.
■
Make sure that the wires are positioned parallel.
10
Wrap the grid wire 5 times around the protrusion of the right housing.
11
Insert the grid wire 3 times through the hole in the protrusion of the right hous-
ing and make a knot each time.
12
Remove the screw from the left housing and push the left housing backwards.
13
Position the screw to block the left housing.
14
Cut both ends of the grid wire.
■
Make sure that the ends are max. 2.5 mm.
15
Take with a pair of tweezers a piece of Masslinn cloth and moisten this with
Cleaner R.
16 Clean the grid wire.
17 Dry the grid wire with a piece of cloth.
18
Take with a pair of tweezers a piece of Masslinn cloth and moisten this with
water.
19
Clean the grid wire.
20 Dry the grid wire with a piece of cloth.
grid wire
max. 2.5 mm