Oce 7050 Скачать руководство пользователя страница 133 | Manualshive

Страница: 133 / 275

Oce 7050 Скачать руководство пользователя страница 133

502

TSM Océ 7050

Functional Description

■

paper output sensor 15B3.

When the paper does not reach the paper output sensor 15B3 in time, the safety
relay K1 on the distribution 22PBA05 is de-activated and the fuser heating is
switched off. Also an error code is generated.

■

NTC’s in the fuser and absorber.

There are five NTC’s in the fuser and one in the absorber. The NTC in the mid-
dle of the fuser is used for temperature control. The other NTC’s are for pro-
tection. When an over-temperature is detected by an NTC or when the
temperature differences measured by the NTC’s is more than 40

°

C, the safety

relay K1 on the distribution 22PBA05 is de-activated and the fuser heating is
switched off. The absorber cooling is switched on. Also an error code is gen-
erated.

3 Temperature regulation

When the original or the paper is placed, the fusing unit allready heats up to a
specific temperature (setpoint) which depends on the choosen material (paper
or film). When the original and the paper are present, the fusing unit will heat
up to the fusing temperature. The setpoint temperature for film can be set ac-
cording to the thickness of the film (4,5 mils or 3,5 mils). The temperature for
4,5 mils is approx. 30

°

C higher than for 3,5 mils (see 08 Fix.

«
...
131
132
133
134
135
...
»

Содержание 7050




















































































































































































































































































Отзывы:

Нет отзывов