Oce 7050, Техническое и сервисное руководство, Страница: 45 / 275

14 TSM Océ 7050 Copy quality
Jams
Original skew
possible cause action / remark
copy material too short minimum length: 420 mm
fed in with curl pointing
upwards instruct the operator to feed in the material with the
curl pointing downwards
pick off pawl not positioned correctly
transfer unit fingers bend
fuser output rollers clean with cleaner K
lower paper guide plate position correctly
fuser guides position correctly
fuser wires clean
plush output plate not positioned correctly
material width > 36” instruct operator
skewed feed skewed leading edge when using long copies
separation not correct measure the separation current (See Faults page 37 )
material too humid condition
output sensor 15B3 does
not detect paper motion
■
material has dog ears
■
O-ring gone
■
check free rotation
copy material too thick check
possible cause action / remark
static charge of the origi-
nal glass Clean original glass and pressure plate with cleaner
A
Supports (Z-0400-20) not
mounted mount (8x)
Top cover has axial play
■
Fill up with a ring
■
advice: use Mod.4