Oce 3121, Техническое и сервисное руководство

Страница: 825 / 908

C
o
nf
id
en
ti
a
l ©
19
98
O
c
é
-T
ec
hn
ol
o
g
ie
s
B
.V
.
ed.1 SDS Description 13
Stapler alarm (Multi Tray-12)
Code Nature Cause Operation Display Resetting
02H Staple jam The stapler safety sen-
sor MS6 has turned on
for some reason.
The stapler is not
securely installed.
Normal stapling oper-
ation is not possible.
Stops stapling Flashes the
Manual Sta-
ple key.
Indicates a
message on
the copier’s
control
panel.
Wait until the
machine automati-
cally recovers
(about 1 sec after the
stapler safety sensor
turns off).
Open and then close
the stapler cover.
03H Stapling
safety pro-
tection
mecha-
nism acti-
vation The stapler safety sen-
sor MS6 has turned on
during stapling opera-
tion. Stops sta-
pling. No indica-
tion Remove the cause
that turned on the
stapler safety sensor
MS6; wait until the
machine recovers
automatically in
about 1 sec after the
stapler safety sensor
turns off.
05H Over sta-
pling
capacity The volume of paper
in a single bin has
exceeded the maxi-
mum value (20 sheets)
in stapler sorter mode. Finishes sort-
ing but stops
without sta-
pling. Indicates a
message on
the copier’s
control
panel. Remove all paper
(stack).
06H Full sta-
pling
capacity. The volume of paper
in a single bin has
reached the maxi-
mum value (20 sheets)
in stapler sorter mode. Operates nor-
mally. No indica-
tion Remove all paper
(stack).
07H Mixed
paper
sizes Sheets of different
widths have been
placed in the bin. Finishes sort-
ing but stops
without sta-
pling. No indica-
tion. Remove all paper
(stack).
09H Paper in
bin. Paper is remaining
inside the bin Indicates a
message if the
stapler sorter
mode is
selected. Turns on the
Manual Sta-
ple key.
Indicates a
message on
the copier’s
control
panel if the
stapler sorter
mode is
selected in
this condi-
tion. Remove all paper
(stack).
0AH Staple
absent.
The stapler has run
out of staples. Prohibits sta-
pling. Indicates the
Add Staple
message. Replace the staple
cartridge.